Archive for Blog

NBSS Week 27 – Finishing the chair, and more basket weave carving!

Lots of work again this week, so let’s jump right in! Now that the front and rear halves of the chair are together it’s time to add the corner glue blocks.  

Read more

NBSS Week 26 – Real progress on the chair and some actual basket weave carving on the basket weave table

I managed to accomplish a lot of work over the past two weeks so let’s jump right in shall we? Now that the backsplat is fitted to the chair it’s time to work on some of the decorative details that I’m incorporating into my chair.

Read more

NBSS Week 25 – Chair Class part 5 and you guessed it: more basket weave table work!

Alright folks it’s been 25 weeks now and let’s face it my posts have gotten a bit dull (heck they may have even started out that way). Many of you who know me have been like what’s up, where’s the Mike we know and love? For those of you who don’t know me, just look […]

Read more

NBSS Week 24 – Chair class part 4, a full-day upholstery demo, and a bit more work on the basket weave table

We began this week fitting the crest rail to our chair. We first set up the mortise machine and cut the mortises for both the rear seat post tenons and the upper rear backsplat.

Read more

NBSS Week 23 – Chair class part 3 and some more basket weave table construction

Week three of the chair class began with more mortises. We set up the mortising machine to cut the side seat rail mortises and this involved creating some unique angled blocks to position the legs, as these mortises are angled.

Read more

NBSS Week 22 ¬– Chair project week 2 and some basket weave table redesigns

This week began with a delivery from Irion lumber with wood for our chair classes. We unloaded the lumber and had a lecture on the best way to lay out the chair parts for grain and color match as well as for yield on each of our boards. We then cut out the individual parts […]

Read more

NBSS Week 21 – The start of semester 2, completing the toolbox, the start of the NBSS chair project, and first table project submission

This week started with a snow day! The Boston winter so far has been pretty tame but classes were canceled this Monday as a big storm front moved through.

Read more

NBSS Week 20 – Toolbox details and the end of Semester 1

This week was all about finishing up the toolbox. I started the week by gluing up the front panel lid.  

Read more

NBSS Week 19 – Completing the “Rasta” Windsor chair and more toolbox details

With the undercarriage of our chair glued up last week, we moved on to completing the top half this week. We started off by finishing the shaping of the seatback hoop with the spokeshave and then test fitting it into our seats. Once the hoop was fitted we grabbed our spindles out of the kiln, […]

Read more

NBSS Week 18 – Windsor chair class Part 3, and more toolbox details

Peter Galbert worked us hard this week in our chair class. We started the week by shaping the legs to their final profiles using the spokeshave. We then inserted the legs into our seat blank in their proper orientation and marked the areas that needed to be drilled for both the top and bottom stretchers. […]

Read more